Phenolic Pegboards - Drying Racks
Solid phenolic laboratory peg boards or drying racks are fabricated from Trespa Top Lab Plus - chemical resistant laboratory sheet materials, to meet the demands of end-users that require a strong and chemical resistant board for drying beakers, test tubes and other apparatus in the work or school environment. Peg boards or drying racks are made from 1" thick (25mm) sheet stock, with 3/8" (9.525mm) diameter holes, 2 prong removable polypropylene pegs and stainless-steel drip troughs with drain outlet and hose.
Architectural specification for Phenolic DRYING RACKS / PEGBOARDS
Trespa Top Lab Plus (TLP) Phenolic Drying Rack
Pegboards / Drying Racks:
Trespa Solid Phenolic Resin board, fabricated of 1" thick black phenolic resin with black or white polypropylene pegs in 5", 6-1/2" and 8" lengths, comes with 2" to 4" deep full width stainless steel drip trough with outlet and hose. Base of pegs shall be two-prong style for mechanical attachment.
Do not bond pegs to board. Pegs shall protrude at 45-degree angle. Pegboard to have finished face and exposed edges.Color: Black, Slate Grey, Silver Grey, Regular White or color as selected from supplier's full range of colored Trespa Solid Phenolic Resin pegboards / drying racks.
Basis of supply or fabrication:
Total Laboratory Solutions, Scottsdale, AZ 85266
www.PhenolicResinLabs.com
Ph: 480.488.6421
Email: Sales@PhenolicResinLabs.com
Imperial Sizing |
Metric Sizing |
18" x 24" with 21 Pegs |
457 mm x 610 mm |
20" x 30" with 32 Pegs |
508 mm x 762 mm |
24" x 24" with 28 Pegs |
610 mm x 610 mm |
24" x 30" with 39 Pegs |
610 mm x 762 mm |
30" x 24" with 39 Pegs |
762 mm x 610 mm |
30" x 30" with 46 Pegs |
762 mm x 762 mm |
30" x 36" with 56 Pegs |
762 mm x 914 mm |
30" x 42" with 68 Pegs |
762 mm x 1067 mm |
32" x 30" with 53 Pegs |
813 mm x 762 mm |
36" x 30" with 60 Pegs |
914 mm x 762 mm |
36" x 36" with 68 Pegs |
914 mm x 914 mm |
42" x 30" with 68 Pegs |
1067 mm x 762 mm |
48" x 30" with 81 Pegs |
1219 mm x 1219mm
|
Non-standard size Trespa TLP Peg Boards are available to meet any specification or requirement.
Produced in all Trespa colors with industry standard black, slate gray, silver gray or regular white in stock.
Polypropylene (PP) pegs are produced with 2 Prongs in either black or white color, in lengths of 5" (127 mm), 6.5" (165 mm) and 8" (200 mm). Black PP Pegs 5", 6.5" and 8" two prong pegs are industry standard and in stock.

Dura-Line Stainless Steel Troughs (FDT) are produced from 20 gauge, type 304 stainless steel #4 finish that mount from the underside or face mount to a solid phenolic Trespa TLP or Duratop epoxy style pegboard with a 1" (25 MM) flange. All troughs come complete with three feet of clear, flexible PVC drain hose tubing and have pre-drilled holes for easy attachment.
All Troughs are available in 2" (50 mm) or 4" (100 mm) width and 1" (25 MM) depth.
Under Mount

Face Mount

Acrylic Pegboard
